General information about Intelligent Pipe Location Detector Metallic Cable and Pipe Locator AD-PD2084D
Quick Details
active detection frequencies: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz
passive detection band: frequency , RF
Three detection modes: Intelligent broad, narrow peaks , audio valley
high-power transmitter: Maximum 10W, four adjustable
Detection depth range: 10 m
Application Area: Metal pipe
Afterservice: Yes
MOQ: 1
Volume: 275mm * 220mm * 100mm
Weight: 2.4kg
AD-PD2084D consists of a signal transmitter and receiver, with a variety of innovative features, can be used to detect metal pipeline cable, underground cable route, depth measurement and uniqueness.
Can be widely used in electric power, communication, street lamps, railways, factories and mines, municipal, water, gas and other departments, the main purpose
Power sector:
Cable route lookup (neutral or live)
Cable identification (neutral or live)
Street light cable fault point
Ultra-high voltage cable sheath fault point
Census ground excavation in front of the cable
Municipal and other engineering department:
Find the path of tap water, gas pipes
Census ground excavation in front of the cable
Pipeline operation maintenance department:
Find the pipeline route
Fixed-point pipeline anti corrosive coating damage
- specifications
Technical specification of the device:
Transmitter:
Output: Direct Connect , calipers coupling, radiation sensors , capacitive coupling.
Output frequency : 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz, check barrier frequency.
Output Power: Max 10W, four adjustable .
Output voltage: Maximum 200V ( AC peak )
Impedance matching and overload protection : automatic
HMI : 128*64 dot matrix LCD display
Built-in Battery: Lithium-ion battery pack , the nominal 14.8V, 7Ah
External Power: Nominal voltage DC12V ( car power , cigarette lighter output )
Charger: Input AC220V, output DC16.8V, 2 / 3A.
Volume: 275mm * 220mm * 100mm
Weight: 2.4kg
Receiver:
Signal Input: built-in coil , calipers , 1k stethoscope , 8k stethoscope , check barrier A-frame
Receiving frequency : 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz, frequency , radio frequency
Pipeline detection modes: Intelligent broad France , narrow peak method , audio Valley France
Cable identification mode: calipers intelligent identification, calipers current measurement identification, stethoscope identification.
Detection depth range: 10 meters
HMI : 320*240 dot matrix LCD display
Built-in Battery: Lithium-ion battery pack , the nominal 7.4V, 7Ah
Charger: Input AC220V, output DC8.4V, 2 / 3A
Volume:700mm*270mm*120mm
Weight : Host 3.5kg