General information about ADOR-308LP Lubrication Oil Purifier
ADOR-308LP Lubrication Oil Purifier is used for cooling, lubricating or speed regulation of various indutrial waste oil with the viscosity lower than 320mm/s ,such as mechanical oil ,hydraulic oil ,compressor oil and cooler oil etc. which will be polluted by water (free water, dissolved water, emulsified water) and particles.Water and particles will seriously affect safe running and lifetime of turbine or lubricating systems. It can work combined with our regeneration system to remove oil sludge and colloid, to de-color and reduce acid value.
Features
1. Vacuum separation of the oil filtration machine is connected with an inflator. This is our new technology. It uses particular stainless steel, foldable column, to dehydrate and degas. This design can get good separation effect by the three-dimensional evaporation when there is enough time for oil falling.
2. It uses new-type heating equipment with low heating load is to prevent oil from ageing.
3. Since there are high water content in turbine oil, ADOR-308LP oil filtration machine uses water-ring vacuum pump.
4. There is photoelectric switch to control oil level with sensitive and precise features (even. foams can be sensed). So there is no possibility of oil-spraying
5. It uses high-viscosity oil feed pump which has special sealing treatment. It is free from oil leakage, low noise and long lifetime.
6. The multi-stage filters and be china-made or Italy-made for different kinds of oil as your required.
- specifications
Technical specification of the device:
|
Item |
Parameter |
Unit |
ADOR0.6KY-T |
ADOR1.2KY-T |
ADOR1.8KY-T |
ADOR3KY-T |
ADOR6KY-T |
ADOR9KY-T |
ADOR12KY-T |
ADOR18KY-T |
|
|
Technical Parameter |
Flow Rate |
L/H |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
18000 |
|
|
Working Vacuity |
Mpa |
-0.07~-0.101 |
|||||||||
|
Working pressure |
Mpa |
≤0.35 |
|||||||||
|
Temperature Range |
oC |
45-65 |
|||||||||
|
Power Supply |
50Hz 380V 3-Phase 4-Wire |
||||||||||
|
Total Power |
KW |
6+1.5 |
9+1.5 |
12+1.5 |
30+3 |
2×30+4.4 |
3×30+6 |
3×30+7 |
4×30+11 |
||
|
Inlet/Outlet Diameter |
mm |
32/25 |
38/32 |
44/38 |
48/44 |
64/48 |
76/64 |
||||
|
Size |
Length |
mm |
1300 |
1300 |
1300 |
1900 |
1900 |
2100 |
2200 |
2300 |
|
|
Width |
mm |
1000 |
1050 |
1050 |
1400 |
1400 |
1500 |
1600 |
1700 |
||
|
Height |
mm |
1250 |
1450 |
1450 |
1950 |
2100 |
2150 |
2250 |
2300 |
||
|
Weight |
Kg |
320 |
380 |
450 |
850 |
1100 |
1500 |
2000 |
2900 |
||
|
Oil Treatment Index |
Water Content |
ppm |
≤50 |
||||||||
|
Kinematic Viscosity |
m/s |
≤20% in comparison to the original bias value of new oil |
|||||||||
|
Demulsibility |
min |
≤15 |
|||||||||
|
Filtering Accuracy |
μm |
≤5 |
|||||||||
|
Cleanness |
NAS |
≤ Grade 6 |
|||||||||
|
Oil Appearance |
Transparence |
||||||||||