General information about ADIP-613DS Diezoresistive Pressure Sensor
Introduction:
ADIP-613DS series is a 14-bits digital output pressure sensor, supporting I²C interface protocol. The external pressure is passed to sensitive elements through 316L stainless steel diaphram and internal silicon oil.this device can be used to measure all pressure media compatible with stainless steel.
The series sensor realizes pressure and temperature calibration and compensation via a specially customized integrated circuit. It outputs 10%-90% digital signal as well as digital output of temperature signal.
Applications：
Automation control
Pressure instruments
Level measurement
Pressure transmitters
Features:
SPI, I²C, 0-5V, 0-10V communication
OEM, ODM & Customization service
Suited for pressure range: 0-40Kpa…7Mpa
Wide temperature compensation range: total error<1%
Measurable of corrosive media ( media compatible with 316L)
Standard mounting size
- specifications
Technical specification of the device:
| Parameters | Min. | Typical | Max. | Notes | |||
| Interface Type | I2C（ADDR，0X28H） | SPI (optional) | |||||
| Accuracy(%FS) | 40Kpa | ±0.20 | ±0.30 | combined linearity, hysteresis and repeatability. |
|||
| >40Kpa | ±0.10 | ±0.20 | |||||
| Total Error Band（%FS） | -1 | 1 | includes calibration errors and temperature effects over the compensated range. | ||||
| Output Type | 10% — 90% （A type) | 5%-95%(B type) Optional | |||||
| Zero Pressure Output | 666 | Count Hex | |||||
| Full Scale Pressure Output(FS) | 399A | ||||||
| Resolution–Pressure(%FS) | 0.008 | 14bits | |||||
| Temp. Accuracy(℃) | -1.5 | 1.5 | over the compensated temperature range |
||||
| Resolution–Temp.(℃) | 0.1 | 8~11bits | |||||
| Operating Temp.(℃) | -40 | 125 | |||||
| Compensated Temp.(℃) |
40Kpa | 0 | 50 | ||||
| ≥100Kpa | -10 | 70 | |||||
| Input Voltage(V) | 2.7 | 3.3 | 5.5 | ||||
| Supply Current（mA) | 3.0 | ||||||
| Load Resistance（KΩ） | 10 | ||||||
| Insulation Resistance (MΩ/50V) |
50 | ||||||
| Response Time（ms) | 0.5 | ||||||
| Pressure Range | 0-40Kpa…7Mpa | See ordering information | |||||
| Overpressure | ≤4Mpa | 2X | |||||
| 7Mpa | 1.5X | ||||||
| Media–Pressure | Liquids and gases compatible with 316L Stainless Steel | ||||||