General information about ADTC-626CI Capacitive Intelligent Circuit Board
ADTC-626CI Capacitive Intelligent Circuit Board replaced the original 4~20mA analog board. With the main body of Microcontrollers CPU, ADTC-626CI is capable to do logical operation and programming. It combines analog and digital circuit in one machine, so is able to output analog signal as well as digital signal. Parameters configuration and compensation of transmitters can be done by buttons on LCD module and internal debugging program. ADTC-626CI circuit board is specially designed for capacitive differential pressure sensor, and is suited for ADTC-626CI housing.
Features:
1. Easy adjusting by buttons: on-site span changing by LCD module buttons free from standard pressure source; for headless type, PV reset and span correction with pressure source done by buttons on mainboard
2. High accuracy: for intelligent board, AD accuracy > 20 bits, DA accuracy > 16 bits
3. Good stability: The complete machine linearity better than 0.2%, temperature
4. Data backup and restore
5. Strong capability for anti-disturbance: Leading military-grade hardware and software anti-disturbance technology.
- specifications
Technical specification of the device:
Supply power:DC12-32V (DC 24V is suggested)
Matching sensor:Metal capacitive sensor
Sampling rate:>20times/s
Displaying and bits:LCD with backlight, displaying 5 bits, and 4 decimal places
Displaying interface:English or Chinese,displaying pressure, temperature/current/ percentage(interactive display) and 0-100% analog displaying
Displaying units:12 displaying units, kPa, m4H2O, MPa, M, inH2O etc.
Output resolution:1uA
Temp. compensation accuracy:-30~70℃ complete machine accuracy is better than 0.5% (including accuracy of sensor)
Linearity accuracy:Complete machine linearity is better than 0.2% (Multi-point calibrating is available as required)
Stability:0.2%/Year
Anti-disturbancePower isolation, signal isolation (magnetic isolation)
Range ratio:10:01
Circuit protection Measurement:surge current protection, Reverse Power Protection
Circuit design:Intrinsic safet
Isolation range:>200MΩ
Communication Protocol:Private protocol
Adjusting method:by buttons on LCD head or program on pc
Dimensions:OD=61mm, Mounting hole pitch=55.14mm (suited for gauge,differential, micro differential pressure transmitter in JT3051DS housing)
Motherboard buttons operation:reset, lower range calibration(zero drift under pressure source), upper range calibration (full scale calibration)
LCD head buttons operation:changing span units, decimal place, output features, changing damping time, currant fixing, write-protection,factory reset and zero clearing